NEWS
HOME > News
NEWS
2013-03-11
20130311 Safety Information
Recently, Canada IC SAR testing for certification in the new requirements, certification testing
organizations in the future to submit a review must be in accordance with the following requirements
guiding test and perfect report :
Testing each band high, medium, low-channel liquid parameters must be listed, the parameters
of the liquid used in the system calibration requires detailed list, and these values are consistent
with the needs and the original data in the test report. Specific norms RSS 102, Issue 4 Annex E details.
The SAR assessment methods must be consistent with IEC 62209-2 and IEEE 1528. Due to the
refinement of the two international standards is not enough for the actual testing and certification,
as mentioned in the cited the SAR testing IC certification in accordance with its approved FCC KDB
Test guidance documents. It should be noted that when the use of the IEC 62209-2 for equipment
close to the human body part specification requirements, and this corresponds; IEEE 1528 is close
to the person's head portion. When a device needs to be tested simultaneously the head and body
parts, the SAR test report must contain two types of uncertainty assessment is based on an IEEE 1528,
another in accordance with IEC 62209-2. Uncertainty assessment of IEC 62209-2 is a new requirement,
and requires special attention.
organizations in the future to submit a review must be in accordance with the following requirements
guiding test and perfect report :
Testing each band high, medium, low-channel liquid parameters must be listed, the parameters
of the liquid used in the system calibration requires detailed list, and these values are consistent
with the needs and the original data in the test report. Specific norms RSS 102, Issue 4 Annex E details.
The SAR assessment methods must be consistent with IEC 62209-2 and IEEE 1528. Due to the
refinement of the two international standards is not enough for the actual testing and certification,
as mentioned in the cited the SAR testing IC certification in accordance with its approved FCC KDB
Test guidance documents. It should be noted that when the use of the IEC 62209-2 for equipment
close to the human body part specification requirements, and this corresponds; IEEE 1528 is close
to the person's head portion. When a device needs to be tested simultaneously the head and body
parts, the SAR test report must contain two types of uncertainty assessment is based on an IEEE 1528,
another in accordance with IEC 62209-2. Uncertainty assessment of IEC 62209-2 is a new requirement,
and requires special attention.
