HOME > News
NEWS
2015-07-20
European Energy ErP for external power supply Adapter
ErP European Energy Mika for an external power supply is applied rule No. 278/2009 (External power supply) bulletin update the draft bill before the expected implementation date
European ErP applied for the external power supply Mika rule No. 278/2009 has issued draft revision of the expected announcement of the implementation of new regulations, will adopt a two-stage implementation requirements, detailed as follows:
1. Tier 1: 2017 before January request meets the US DoE LEVEL VI requires the following Table 1.
2. Tier 2: 2018 until July request meets the CoC Version 5 Tier 2 requirements are as follows
Table 1.1, 2.1, 2.2 in the yellow section.
The US DoE Level VI was last announcement 10 February 2016 began to comply with Level VI
European ErP applied for the external power supply Mika rule No. 278/2009 has issued draft revision of the expected announcement of the implementation of new regulations, will adopt a two-stage implementation requirements, detailed as follows:
1. Tier 1: 2017 before January request meets the US DoE LEVEL VI requires the following Table 1.
2. Tier 2: 2018 until July request meets the CoC Version 5 Tier 2 requirements are as follows
Table 1.1, 2.1, 2.2 in the yellow section.
The US DoE Level VI was last announcement 10 February 2016 began to comply with Level VI
Table 1 DOE Level VI |
||||
Single-Voltage External AC-DC or AC-AC Power Supply | ||||
Nameplate Output Power (Pno) | Minimum Average Efficiency in Active Mode | Maximum Power in No-Load Mode(Basic-Voltage & Low-voltage) | ||
Basic-Voltage | Low-Voltage | Ac-Ac | Ac-Dc | |
≤ 1W | ≥ 0.5 ×Pno + 0.16 | ≥ 0.517 × Pout + 0.087 | ≤ 0.21W | ≤ 0.10W |
1 W < to ≤ 49 W | ≥ 0.071 × ln(Pno) − 0.0014 ×Pno +0.67 | ≥0.0834×ln(Pno)−0.0014×Pno +0.609 | ≤ 0.21W | ≤ 0.10W |
49W < to ≤ 250W | ≥ 0.880 | ≥ 0.870 | ≤ 0.21W | |
> 250W | ≥ 0.875 | ≥ 0.875 | ≤ 0.50W |
Code of Conduct on Energy Efficiency of External Power Supply Version 5 (CoC Version 5)