NEWS
HOME > News
NEWS
2013-09-23
20130923 Safety Information
Germany notified plug GS certified product (eg wall plug power supply) to be based on tests
performed EK1 Directive 557-13。
Class II direct wall plug power supply (with Europe plug connector must perform tests to EN 50075)
regardless of application TUV / Rh, TUV / SUD or units issued by Nemko GS certification verification,
the plug must comply with the EK1 Directive 557-13 provisions of the directive detailed test
requirements are as follows:
Class II direct wall plug power supply must perform DIN VDE 0620-2-1:2013 Item 24.2 of
the turning drum test, the following table under an auspicious. After testing, the plug part
shall comply with DIN VDE 0620-101:1992 Project 7 Figure 2 "gauge for interchangeability"
requirements, ie when the plug into a standard outlet gauges, do not need to use extra force
to insert, so that the plug to come into contact with the end surface of the surface of the
standard socket gauges.
Table I: DIN VDE 0620-2-1:2013, sub-clause 24.2 drum test requirements are as follows
Direct Plug-In Power Adapter Weight / Drum test times
This command will affect Class II direct wall plug power supply of the following certification
services, and according to the provisions of ZLS in August 16, 2013 onwards enforced:
* All GS-mark new applications for accreditation。
* GS-mark certificate "extended" (including standard update, five-year extension of the certificate expires, etc. ...)。
* GS-mark modifications and additional certification application, the design changes will be required to
perform to the plug portion of the test。
performed EK1 Directive 557-13。
Class II direct wall plug power supply (with Europe plug connector must perform tests to EN 50075)
regardless of application TUV / Rh, TUV / SUD or units issued by Nemko GS certification verification,
the plug must comply with the EK1 Directive 557-13 provisions of the directive detailed test
requirements are as follows:
Class II direct wall plug power supply must perform DIN VDE 0620-2-1:2013 Item 24.2 of
the turning drum test, the following table under an auspicious. After testing, the plug part
shall comply with DIN VDE 0620-101:1992 Project 7 Figure 2 "gauge for interchangeability"
requirements, ie when the plug into a standard outlet gauges, do not need to use extra force
to insert, so that the plug to come into contact with the end surface of the surface of the
standard socket gauges.
Table I: DIN VDE 0620-2-1:2013, sub-clause 24.2 drum test requirements are as follows
Direct Plug-In Power Adapter Weight / Drum test times
|
Weight ≤ 100 g |
1,000 times |
|
100 g < Weight ≤ 200 g |
500 times |
|
Weight > 200 g |
100 times |
This command will affect Class II direct wall plug power supply of the following certification
services, and according to the provisions of ZLS in August 16, 2013 onwards enforced:
* All GS-mark new applications for accreditation。
* GS-mark certificate "extended" (including standard update, five-year extension of the certificate expires, etc. ...)。
* GS-mark modifications and additional certification application, the design changes will be required to
perform to the plug portion of the test。
